Ghost 2 Immobiliser Cost - A Cost Effective Way to Protect Your Car From Theft
Ghost Immobiliser, a cutting-edge technology, is designed to foil even the most sophisticated theft attempts. It is installed discreetly in your vehicle and prevents the engine from starting unless you enter a precise pin code sequence.
The code is entered using existing car buttons that we have programmed. Included is the service button that is in valet mode.
Cost of installation
Autowatch Ghost is an economical method to safeguard your vehicle from theft. It works similarly to a traditional immobiliser, but the distinction is that it doesn't require the use of a separate fob. It's small and can be tucked into the wiring harness of your car. This makes it inaccessible by thieves. This is because it doesn't emit radio frequency signals and cannot be cloned.
Ghost is the only aftermarket CAN bus immobiliser that features engine start blockage. It stops the car from beginning until a PIN code defined by the user is entered. This is done using the buttons on the dashboard or steering wheel. If the device is stolen then the new owner will need to enter the code for the car to begin.
It is also inaccessible to professional thieves, as it does emit radio signals. It communicates with the ECU of the vehicle using the CAN data networks. The CAN data network is a safe and reliable system that is protected by the manufacturer's warranty. This makes it an excellent option for classic cars as well as sports automobiles.
ghost car immobiliser of the Ghost is that it does not need an external battery or connections. This is especially crucial for vehicles of a certain vintage or prestige which are often left unattended. Furthermore the device can be switched off or reactivated by using a mobile application.
The app has an option to track the status of your vehicle. You will be notified when your vehicle is stolen or interfered with. This will alert you to the location of your vehicle and permit you to take the necessary steps to stop it from being stolen.
The cost of installing a ghost 2 immobiliser ranges from PS455 to PS499 based on the vehicle you are driving. This may seem a large cost, but you could save money in the long run. It's a great choice for old cars that require isolation when they are not in use. It can also help reduce the risk of fires caused by short circuiting.
Cost of maintenance
The immobiliser system of the ghost 2 is a great way to safeguard your vehicle from thieves. The system blocks your car from starting without a PIN or a phone with the Autowatch application installed. This means that thieves will not be able drive away with your car even when they steal your keys or employ methods of theft using relays. This system is concealed to ensure that sophisticated scanning tools cannot detect it. It is simple to install and can be installed in areas that are difficult to reach such as behind the dashboard, or behind the wheel trim.
The device is connected directly to your engine control unit using CAN, making it impossible for thieves to locate or disarm it by cutting wires. It's also tamper-proof and won't be activated should someone attempt to remove it from your engine or transmission. This makes it a powerful deterrent to thieves and it is a recommendation by many insurance companies. GPS tracking is available for added peace-of-mind.
Ghost also comes with other features to help ensure your car's security including an anti-theft feature that stops thieves from cloning your signals or hacking into the ECU. The device has a valet and service mode that allows you to start your car for a short period of time to valet parking. It also comes with an option that allows you to easily change your PIN which is helpful if the PIN is lost or handed to a mechanic.
Unlike other security devices, the ghost immobiliser does NOT require keys or LED indicators. It uses the buttons already on the steering wheel and dash board to create a unique code pattern that only you can recognize. It is programmed to alter the sequence at any time to stop the previous code patterns or drivers being handed over to mechanics.
The Ghost 2 is the newest generation of CAN-based immobilisers. It doesn't require wiring to install. It uses the vehicle's CAN data network to communicate with the engine controller, making it difficult for thieves to get around the device by putting in aftermarket alarm/immobiliser key fobs or modifying the ECU. It is also virtually inaudible and unnoticeable to scanners and monitoring equipment. This is a fantastic solution for owners of expensive or rare vehicles who want to secure their vehicles from theft.
Cost of monitoring
The Ghost is a hidden device that stops thieves from taking the engine of your vehicle. It connects to the CAN data network and makes use of the existing buttons in the steering wheel and dashboard to create an unique sequence that needs to be completed before the car can start. It is tamper-proof and weatherproof, so you can place it anywhere in your vehicle without worrying about it being damaged or taken away. The Ghost is compatible for most vehicles and is recommended by a variety of insurance companies. It can also be linked with a mobile app to allow simple monitoring and management and will send you alerts when your vehicle is being tampered with.
The Autowatch Ghost immobiliser is a cutting-edge next-generation device that guards against key-cloning hacking, and swapping of the ECU. It can be connected to an iPhone app that lets you arm and disarm the system remotely, and even get alerts via phone when your vehicle is being tampered. This is a fantastic way to ensure the security of your vehicle and its contents while also improving the value of your vehicle when reselling it.
This weatherproof and tamper-proof device is undetectable to the naked eye and is able to be concealed in the most difficult of places. It is connected to the CAN data network and doesn't communicate via radio frequency, which blocks thieves from using the common OBD (On Board Diagnostic) ports to get around security systems. The Ghost can be connected to an Apple or Android smart phone, which means you can use it to lock and unlock your vehicle from your home. It also comes with a battery-powered panic button that can be used to activate the alarm in the event of an emergency.
The Ghost is so small and sealed that it could be tucked away inside the vehicle wiring harness, making it nearly impossible for a burglar to locate. The Ghost is also undetectable by diagnostic tools that are commonly used to detect cuts in circuits in modern vehicles. The Ghost also does not have radio signals, which means that professional burglars cannot make use of sophisticated RF scanners and technology to detect the security system installed.
Cost of replacing keys
The Ghost immobiliser works by communicating with your vehicle's ECU via the CAN data bus. This stops your car from starting if you don't have the correct pin code. It is a tamper-proof system that can be combined with GPS tracking to make it even more difficult for thieves to take your vehicle. It can also be temporarily disabled with Transport Mode which is ideal for situations like transport or when your vehicle is getting serviced.
It can be installed in the shortest amount of time by a registered installer who is TASSA-registered. Installation doesn't require cutting any wires or cables and is completely non-invasive. This means that you won't be concerned about damaging your warranty or the performance of your vehicle. This is a great option for those who wish to improve their insurance rates and safeguard their vehicles against theft.
The device is a small, discrete device that can be installed anywhere in your car. It's hidden within your car's wiring harness and is almost undetectable. It doesn't have LED indicators or key fobs, therefore it's difficult for thieves to find. The system is controlled remotely through an iPhone app. The app lets you arm and disarm your vehicle remotely. It also sends you notifications in case of an incident of burglary.
The Ghost immobiliser doesn't have any impact on jamming signals or device spoofing. These are methods that thieves employ to circumvent traditional immobilisers. It also is protected from RF scanning, which is a common method of stealing vehicles.
The process of installing the Ghost is simple and easy and can be completed in about an hour. The installer will check whether the system is compatible with your car prior to beginning the installation. The system will be tested to ensure it is working properly. They will then program the immobiliser to function with your vehicle's security system. The final step is to set your PIN code. Once it's set up the system will be ready to use.