Ghost 2 Immobiliser Installation
The installation of the ghost 2 immobiliser is a simple and effective way to secure your vehicle from theft. It connects directly to the vehicle's CAN data network and is almost undetectable.
First, determine a constant power source and an earthing point. These wires must be properly protected from electrical shorts.
Protects against theft
The Ghost 2 Immobiliser creates an individual PIN code by using the electronic buttons on your steering or the centre console. This makes sure that only you are able to start your vehicle. Even if thieves are able to copy your keys or hack your car's system it will not be able to start the vehicle. It's also completely quiet and unnoticeable by anyone who tests it, so you can rest sure that no one will notice that you've added an extra layer of security.
It also assists in preventing theft as it can stop the engine of your car even if a thief is able to get inside. This is achieved by utilising another device, the Shadow, which connects to the CAN data network in your vehicle and does not communicate via radio frequency, making it difficult for thieves to track or tamper with. The Shadow can also be connected to your vehicle's tracking/paging system, allowing you to monitor its movements. It also has an output that can be used to activate the siren if someone attempts to take it.
When working with wiring it is important to work in an area that is well-lit. This will enable you to identify the correct wires and prevent any accidental short circuits or disconnections. Checking the connections twice and testing them is important and also protecting the wiring from the elements. Cable tie is a great way to secure wires and bundle them. This can improve their appearance and decrease the chance of them getting dislodged when the vehicle is in use.
It is also a good idea to mark the CAN H and CAN L wires using pieces of tape or labels, as misidentifying their location could cause an electric surge that could damage the immobiliser. It's also a good idea to test the identified power source and grounding point using an instrument to ensure that they are providing a steady 12V supply and a solid grounding.
Easy to use
Ghost immobilisers are an excellent way to keep your vehicle safe from theft. It can be paired up with an iPhone application to make it easy to manage and monitoring. The app will also send notifications if your car has been compromised. The app can also help locate your car in the event that it is stolen.
The Ghost immobiliser is discreet and doesn't require any special equipment in order to function. It is linked to the CAN system of your vehicle and is programmed with a unique PIN code. It is activated by pressing a series of buttons on your dashboard and steering wheel, or through the WeCar mobile application. The code has to be entered to turn on the engine, so that thieves aren't able just to turn on your vehicle and drive off.
Installing a ghost immobiliser can be simple, but it's important to follow the directions carefully to ensure that it is a seamless integration into your vehicle's existing systems. The first step is to remove the battery. This will avoid an accidental airbag deployment and ensure safety. It is also essential to work in an area that is well-lit to avoid a sloppy and inaccurate connections. It is also essential to employ proper soldering techniques or high-quality connectors to ensure a solid and secure connection.
The CAN H and CAN L wires are essential to connect the Ghost immobiliser to your vehicle's wiring. Using a vehicle wiring diagram determine these wires and find a suitable place to connect them. Mark these wires with labels or tape to make them easier to recognize when installing.
It's a good idea test your immobiliser once the connections have been made to make sure that it functions correctly. It's also an excellent idea to test the Transport Mode, which disables the Ghost system and allows you to temporarily disable your security features. This is particularly helpful for scenarios like servicing or transportation of vehicles. This feature is particularly useful for older vehicle that requires its battery to be isolated for servicing.
Low-profile
A ghost immobiliser can be used to prevent theft from vehicles with keyless entry. It works by capturing the signal from the original remote and forming an obstruction that thieves can't break through without the correct PIN code. It's a safe and discreet way to protect your car and is even suggested by insurance companies to cut down on the cost of your monthly cost. It's a low-profile device that is hidden within your car's existing buttons and does not use LED indicators, making it virtually unnoticeable to thieves.
The Ghost immobiliser, in contrast to other security systems, is linked to the CAN data network of your vehicle instead of remote control. It is secure and thieves cannot disable it by cutting wires. This makes it much more difficult to steal your vehicle and is also an excellent option for older vehicles that are not equipped with a modern keyless entry system.
The installation of a ghost immobiliser can be handled by an expert or you can do it yourself with the right tools and materials. You'll require basic hand tools and a multimeter to test electrical values, as well as insulation tape or cable ties to ensure your connections are secure and well-insulated. Before ghost car immobiliser start your engine, you should disconnect your battery and be sure that all wiring is neatly bundled. This will prevent thieves from tampering.
If you're uncomfortable doing your own immobiliser installation, you can find an auto repair shop in your area to do it for you. They'll take care of the entire procedure beginning with the initial inspection right through to the installation. If anything is not working, they'll offer a warranty. They'll be able to answer any questions you may have regarding the immobiliser and assist you in deciding whether it's the right option for your vehicle.
ghost immobiliser price is a intelligent immobiliser that connects directly with your car's ECU. This helps protect against key cloning and hacking attacks that are typical in modern vehicles. It is TASSA-certified and provides the best theft protection, so you can drive with confidence.
TASSA verified
The Ghost immobiliser is one of the most effective ways to guard your car from theft. It connects to the CAN data network in your car and blocks your engine from running without your personal PIN code. The system is not detectable by thieves and is an excellent alternative to car alarms. You can change the PIN code at any time, and only you will know the change, ensuring the security of your vehicle.
A TASSA verified installer will complete the installation of Ghost Ghost system in a couple of hours at your home or place of work. You will also receive a complimentary emergency card, installation certificates, and owner's manuals. They will also provide you with a a thorough demonstration of the device and ensure that you are happy with the service before they leave.
Like other immobilisers Ghost is able to connect directly to the CAN data network of your vehicle. It can be installed without needing to cut any wires. It is also silent and is therefore difficult for thieves to identify. The system has a unique and reversible PIN code that you enter by pressing buttons on the dashboard or steering wheel. This blocks anyone from starting your car, even if they have your key fobs.
If you're ready to install an immobiliser for a ghost 2, you should begin by disconnecting the battery. This will avoid any airbag deployments or short circuits in the process. Once the battery has been removed, it is important to follow the instructions in the user manual for connecting the immobiliser. Check online resources for additional details specific to your particular model.
Once you have completed the process, check the immobiliser to make sure that it works properly. You can perform this by entering the PIN code and then trying to start the vehicle. You should then perform regular tests on the immobiliser to make sure it's functioning properly. This will allow you to identify any issues early so you can fix them quickly.